HDL-380 Film Dryer with 8 Air Flow Channels for NDT

HDL-380 8 Air Flow Channels Film Dryer

Working principle

According to the principle of the baking sheet of the fully automatic washing machine, put the hand washed film on the sheet feed plate. After the film sensor detects the film, the machine's transmission mechanism begins to run and will automatically send the film into the dryer, and the PTC drying component below starts to blow the hot air directly onto the film, and the film is dried by drying the suction shaft. After the water absorption and hot air blow drying, the film is taken directly from the chip outlet. The whole process can only be obtained for 45 seconds, and the staff can get a dry film directly to evaluate the film.

Technical parameters and specifications

● Add the function of chip induction

● 8 air flow channels, Improved air duct, higher drying efficiency

● Roller shaft: DuPont foamed uranium is used to ensure that it will not harden within 5 years

● Shell: engineering PVC plastic

● Heating element: PTC heating element

● Temperature control mode: constant temperature control with solid-state relay

● Optional parts: water washing circulating device, which aims at no tap water, poor water quality or frequent water stoppage at the use site

HDL-380 film dryer with 8 channels

air flow film dryer for NDT

non-destructive testing film dryer

HDL-380 Film Dryer with 8 Air Flow Channels for NDT Images